BSEE conducts deployment exercise of Helix capping stack system

Posted on 30 April 2013

The US Bureau of Safety and Environmental Enforcement (BSEE) today launched an unannounced exercise to deploy critical pieces of state-of-the-art well control equipment to the ultra-deep seabed of the Gulf of Mexico. The exercise employs Helix Well Containment Group’s capping stack system, equipment that is used to stop the flow of oil and gas in the event that a blowout preventer is ineffective, with Noble Energy serving as the designated operator.

Part of the reforms that the Interior Department undertook after Macondo was a requirement for deepwater operators to demonstrate immediate access to surface and subsea containment resources that would be adequate to promptly respond to a blowout or other loss of well control. Several such components are being tested in the exercise initiated today.

“We fully expect operators to have the plans, equipment and capabilities in place to respond to a subsea blowout in deepwater at a moment’s notice,” BSEE Director Jim Watson said. “These types of exercises give us an opportunity to see how the equipment is deployed in real-world conditions and to learn lessons that can be shared across the industry to protect the environment and improve the safety of offshore operations.”

During this exercise, Helix’s capping stack will be mobilized and deployed to the sea floor in 5,047 ft of water, latched to a test wellhead and pressurized. The exercise is also designed to test Noble Energy’s ability to obtain and schedule the deployment of the supporting systems necessary for successful containment. The Helix capping stack is similar to the technology used to stop the flow of oil from the Macondo well.

BSEE inspectors, engineers and spill response experts will be embedded in various locations throughout the exercise, including in the command center and on the vessel deploying the capping stack, to oversee the mobilization, deployment and associated tests of the system. BSEE experts will oversee the capping stack being lowered to the seafloor by wire, a technique that offers the potential to be significantly faster than the deployment via pipe that occurred during the Macondo response.

Helix is one of two consortia that provide contract access to well containment equipment to oil and gas operators in the Gulf of Mexico. This equipment is required by BSEE for drilling with subsea blowout preventers in deepwater, among other situations. The other consortium, the Marine Well Containment Company, successfully completed a similar deployment exercise in July 2012.

Leave a Reply

*

FEATURED MICROSITES


Recent Drilling News

  • 31 October 2014

    Japan Drilling to operate new jackup under construction at Keppel

    The KFELS Super B Class design has a drilling depth of 35,000 ft. The rig's leg structure is designed to provide enhanced robustness for operations at 400 ft water depth...

  • 29 October 2014

    New intelligent water management solution based on oxidizer technology

    Nalco Champion has launched the RenewIQ line of oilfield water reuse solutions to help operators reduce freshwater consumption and associated handling costs...

  • 29 October 2014

    Baker Hughes launches all-electric intelligent well system

    Baker Hughes has commercially released its MultiNode all-electric intelligent well system. It allows operators to remotely monitor and control a greater number of production zones...

  • 29 October 2014

    Tercel collaborates with TOTAL to design MicroCORE PDC drill bit

    Tercel Oilfield Products has launched the MicroCORE cutting system at the 2014 SPE Annual Technical Conference and Exhibition in Amsterdam. The MicroCORE cutting...

  • 28 October 2014

    First extension well in pre-salt Libra leads to oil discovery

    The Libra consortium announced that the drilling of the first extension well in the Libra area, known as 3-BRSA-1255-RJS (3-RJS-731), has proven the discovery of high-quality oil...

  • Read more news