Home / Microsites (page 113)


Microsites

Technical Session 12 – Managed Pressure & Underbalanced Drilling

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program. TECHNICAL SESSION 12: MANAGED PRESSURE AND UNDERBALANCED DRILLING SPE/IADC 163501 Utilizing Wired Drill Pipe Technology During Managed Pressure Drilling Operations to Maintain Direction Control, Constant Bottomhole Pressures and Wellbore Integrity in a Deep, Ultra-Depleted Reservoir, J.C. Rasmus, Schlumberger A recently drilled well into an underpressured reservoir provided an opportunity to demonstrate the applicability of wired drill pipe (WDP) to deliver the required measurements and maintain the proper directional control while keeping the well fluids under control. During ...

Read More »

Technical Session 13 – Management & HSE

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program. TECHNICAL SESSION 13:  MANAGEMENT AND HSE SPE/IADC 163422 Drilling Systems Automation – Preparing for the Big Jump Forward, J.P. de Wardt, de Wardt and Co; M. Behounek, Apache Corp; C.D. Chapman, Schlumberger; D. Putra, Schlumberger Cambridge Research Results and knowledge shared from the SPE Workshop held in Vail, Colo., in July 2012 (Well Construction Automation – Preparing for the Big Jump Forward) will be presented. SPE/IADC 163483 Macondo Litigation and its Impact on the Offshore Industry – ...

Read More »

Technical Session 14 – Bit Technology

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program.   TECHNICAL SESSION 14:  BIT TECHNOLOGY SPE/IADC 163521 Pointing Toward Improved PDC Bit Performance: Innovative Conical Shaped Polycrystalline Diamond Insert Achieves Higher ROP and Total Footage, M. Azar, A. White, Smith Bits, a Schlumberger Company; M. Taylor, Schlumberger Vibration induced impact damage can significantly reduce PDC bit/cutter life in hard/abrasive and interbedded formations. To develop a more stable fixed cutter bit for these difficult lithologies, an R&D initiative was launched to investigate new insert designs and experiment ...

Read More »

Technical Session 15 – Drilling and Well Technologies

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program. TECHNICAL SESSION 15: DRILLING AND WELL TECHNOLOGIES SPE/IADC 163560 A Summary Of Wired Drill Pipe (IntelliPipe) Field Trials And Deployment in BP, S.T. Edwards, C.J. Coley, BP The first use of IntelliPipe in BP was in early pre-commercial field trials in seven Oklahoma wells in 2004 to 2005. This paper includes a discussion of the challenges and solutions in areas, such as hardware modifications (e.g. wiring top drives, reamers, jars), deployment, logistics, reliability, pipe handling and other ...

Read More »

Technical Session 16 – Directional Drilling

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program. TECHNICAL SESSION 16: DIRECTIONAL DRILLING SPE/IADC 163526 Drilling Unconventional Shale Wells Remotely, C. Gongora, O. Awan, J.F. Mota, Shell; E. van Oort, University of Texas Austin After a successful pilot application in the Haynesville Shale, Shell Upstream Americas is currently transferring all of its directional drilling, MWD/LWD and geosteering operations in the Americas to remote drilling centers. In this paper, we provide all the learnings and best practices associated with the implementation of the remote drilling centers ...

Read More »

Technical Session 17 – Fluids, Cuttings Transport & Cuttings Processing

Editor’s note: These abstracts have been edited for space and clarity. This program is current as of 15 January 2013. Additions, withdrawals and other changes to the conference program after this date may not be reflected. Click here for the most updated program. TECHNICAL SESSION 17: FLUIDS, CUTTINGS TRANSPORT AND CUTTINGS PROCESSING SPE/IADC 163567 The Use of IntelliPipe Conveyed Along String Annular Pressure Measurements While Drilling High-Angle Offshore Wells in Trinidad, C.J. Coley, S.T. Edwards, BP This paper discusses the use of annulus pressure measurements taken at multiple points along the drill string as an enabling technology for monitoring the transport of drilled solids in near real time. Techniques developed internally to convert the significantly increased quantity of data into ...

Read More »