CATEGORIZED | News

Industry to roll out SEMS toolkit at upcoming conferences

Posted on 24 August 2011

Offshore Operators CommitteeThree upcoming conferences are being held in Texas and Louisiana to introduce a toolkit that the Safety and Environmental Management Systems (SEMS) Task Force of the Offshore Operators Committee (OOC) has developed in conjunction with the Center for Offshore Safety (COS) to help operators and contractors comply with new SEMS regulations. Conferences are scheduled for The Woodlands on 30 August, New Orleans on 31 August and Lafayette on 1 September.

The OOC/COS SEMS toolkit includes:

• Audit checklist;

• Matrices of regulatory mandated training for drilling/marine/production;

• Knowledge and skills documentation worksheet;

• Operator-contractor agreement letter templates;

• Terms/definitions – clarification document; and

• Compliance readiness worksheet.

With the 15 November deadline looming for implementing the US Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) SEMS regulations, operators and contractors that operate on the US Outer Continental Shelf (OCS) are encouraged to send an appropriate representative. These conferences are intended for operations managers, as well as other groups critical to SEMS compliance within the company.

There is no cost to attend; however, due to time and space limitations, companies are asked to limit attendance to no more than three representatives per conference.

To register to attend The Woodlands event on 30 August, click here.

To register to attend the New Orleans event on 31 August, click here.

To register to attend the Lafayette event on 1 September, click here.

IADC is a supporting organization of these conferences, which are being sponsored by Anadarko Petroleum, API/OOC and Baker Hughes.

Leave a Reply

*

FEATURED MICROSITES


Recent Drilling News

  • 17 April 2014

    Shell makes deepwater gas discovery offshore Malaysia

    Shell has made an exploration discovery offshore Malaysia in the Rosmari-1 well located 135 km offshore Malaysia in Block SK318. The well was drilled to a total depth of 2,123...

  • 16 April 2014

    Maersk Drilling takes delivery of ultra-deepwater drillship

    Maersk Drilling has taken the delivery of its second drillship, Maersk Valiant from the Samsung Heavy Industries (SHI) shipyard in Geoje-Si, South-Korea. Maersk Valiant has begun its voyage toward the...

  • 16 April 2014

    Ensco orders new jackups from Lamprell

    Ensco has ordered two high-specification jackups, ENSCO 140 and ENSCO 141, for delivery in mid-2016 from Lamprell’s shipyard in the United Arab Emirates. The rigs will also...

  • 16 April 2014

    MPD/UBD successfully drills sidetrack after 6 failed conventional drilling attempts

    In the Brookeland Field in East Texas, conventional drilling methods failed in six attempts to drill a “straightforward” horizontal wellbore. The original well had surface casing installed...

  • 16 April 2014

    Chevron’s DGD training program serves array of learners across generations

    Since 2008, more than 400 people – from operators, drilling contractors, service companies and regulators – have completed Chevron’s dual-gradient drilling (DGD) training...

  • Read more news